Skip to content
Icons and graphics

QR Code Generator

Make a QR code for a link, Wi-Fi network, email, phone, WhatsApp chat, calendar event, map location or contact, with an optional logo, and download it as PNG or SVG.

Last checked

What should the code hold?

Error correction
Modules

Your code

Version 2 · 25×25 modules · level Q (raised from M, it fits at no cost) · holds up to 20 bytes, 29 capitals and digits or 48 digits.

How to use it

  1. Pick what the code should hold and fill in the fields. The code updates as you type.
  2. Choose the error correction level and the colours, and add a logo if you want one. Keep a dark code on a light background.
  3. Download the PNG for screens and documents or the SVG for print, then test it with a phone before you use it.

What it checks and why

A QR code stores text as a pattern of dark and light squares called modules. A phone camera reads the pattern and shows the text, or acts on it: a link opens, a Wi-Fi code joins the network, a contact card offers to save the person. The code here holds the text itself. It does not point to a service, so it works for as long as the content does, and nothing can switch it off.

Error correction adds extra data so a code still reads when part of it is dirty, scuffed or covered by a logo. Level L recovers about 7 percent, M about 15, Q about 25 and H about 30. Higher levels make a denser code with more modules. The generator picks the smallest size that fits your text and raises the level on its own when the extra protection fits in the same size.

Most codes that fail to scan fail for ordinary reasons. The code was printed too small, the colours were too close, the code was inverted, or the blank border around it, the quiet zone, was cut. The notes next to the preview warn about each of these. The encoder follows the QR standard and has been checked against an independent decoder across all four levels and a range of sizes.

Specs and sources

Limits

  • A code holds at most about 2953 bytes of text, or 7089 digits, at the lowest error correction level. Long text makes a dense code that is hard to scan.
  • The code is static: it holds the text you give it. It cannot count scans or change its target later.
  • Rounded modules scan fine in most cameras, but square modules are the safest choice for print.
  • A logo is capped at 25 percent of the code's width and always uses level H. It still hides data, so scan the result with more than one phone before printing.
  • Event times are saved without a time zone, so a phone reads them in its own local time.

Questions

Does a QR code expire?
Not this one. The text is stored in the pattern itself, so the code works as long as what it points to still exists. Codes from services that redirect through their own link can stop working when the service does.
What size should I print a QR code?
Keep each module at least about 0.4 mm, and the whole code at least 2 cm wide for a short link, and larger for a dense code or a longer reading distance. Test with a phone at the real distance before you print many copies.
How do I make a QR code for Wi-Fi?
Choose Wi-Fi, enter the network name and password and pick the security type. Phones that scan it offer to join the network, so guests do not have to type the password.
Which error correction level should I use?
M is a good default. Use H for print that may get dirty or scuffed, and L for a short code on a screen. A higher level gives a larger, denser code for the same text.
How do I make a QR code with a logo?
Add a logo under the colours. The tool clears the modules behind it, raises error correction to H (about 30 percent recovery) and keeps the logo to at most a quarter of the code's width, so the missing modules can be rebuilt. Test the code with a couple of phones before you print it.
How do I make a WhatsApp QR code?
Choose WhatsApp and enter the number in international format with the country code, plus an optional message. The code holds a wa.me link, which opens a chat with that number when scanned.
Can a QR code hold a PDF or an image?
Not in practice. The largest QR code holds 2,953 bytes of binary data at the lowest error correction level, far less than a typical PDF or photo. Upload the file somewhere and put its link in the code instead.