Skip to content
Text tools

Morse Code Translator

Turn text into Morse code or decode Morse back to text, hear it at the speed you choose with a blinking light, download it as audio, and look up any letter in the chart.

Last checked

Text

Morse code

Sound and light

Light

Morse code chart

Letters

Digits

Punctuation

How to use it

  1. Type text to get Morse code, or switch to Morse to text and paste dots and dashes. Separate letters with a space and words with a slash.
  2. Press Play to hear it and watch the light. Set the speed in words per minute; for learning, keep the speed high and lower the Farnsworth spacing.
  3. Copy the result, copy a share link, or download the sound as a WAV file. Click a letter in the chart to add it to your text.
  4. For a prosign, write its letters in angle brackets, such as <SK> for end of contact; it is sent with no gaps between the letters.

What it checks and why

International Morse code is defined by the ITU in Recommendation ITU-R M.1677-1. It sets the code for each letter, digit and punctuation mark and the timing: a dash is three dots long, the gap inside a letter is one dot, the gap between letters three dots and the gap between words seven. The @ sign was the last addition, in 2004.

Speed is measured in words per minute using the word PARIS, which is exactly 50 dot units long with its trailing gap. At 20 WPM a dot lasts 60 milliseconds. The player and the WAV file use that standard, so 20 WPM here is the same as 20 WPM on a radio trainer.

Farnsworth timing sends each letter at full speed but stretches the gaps between letters and words. Learners hear the rhythm of each letter as it really sounds instead of counting dots, and the gaps shrink as they improve. The stretched gaps follow the ARRL formula that keeps the overall speed at the Farnsworth rate.

A few common signs, such as the exclamation mark, the ampersand and the semicolon, are not in the ITU list. They are still widely used in American and amateur practice, so the translator accepts them and marks them in the chart.

Prosigns are procedure signals sent as one run of dots and dashes, without the gap between letters: SOS, SK (end of contact), KA (start), SN (understood) and HH (error). AR, BT, KN and AS share their code with the plus sign, the equals sign, the opening bracket and the ampersand, so they decode as those characters.

Specs and sources

Limits

  • Non-Latin Morse alphabets (Cyrillic, Greek, Japanese Wabun) and the extra codes for letters such as Ä, É, Ñ or Ü are not included. Accented letters are sent as their base letter.
  • Decoding needs clear letter and word breaks. Morse written without spaces between letters is ambiguous and cannot be split reliably.
  • There is no decoder for sound or for a flashing light from a camera; only typed or pasted Morse is read.
  • On phones, the sound may stay silent while the device is in silent mode, depending on the browser.

Questions

What is SOS in Morse code?
SOS is three dots, three dashes and three dots: ... --- ... It is sent as one continuous signal without the usual gaps between the letters. Type <SOS> to send it that way; the decoder reads ...---... as <SOS>.
How do I write spaces between words in Morse code?
Put a slash between words, for example .... .. / - .... . .-. . for HI THERE. The translator also accepts a vertical bar or three spaces as a word break.
How fast is 20 words per minute in Morse code?
At 20 WPM one dot lasts 60 milliseconds and a dash 180 milliseconds, using the standard word PARIS that is 50 dot units long.
What is Farnsworth timing?
It keeps each letter at full speed but makes the gaps between letters and words longer. Learners use it so they recognise letters by their sound rather than by counting dots and dashes.
Can I download Morse code as audio?
Yes. Download WAV saves the current message as a sound file at the speed, spacing and tone you chose, ready to play in any media player or editor.
Is there Morse code for the exclamation mark?
Not in the ITU list. The common code -.-.-- comes from American practice and is widely understood, so the translator uses it and marks it as not ITU.